- DJS Engineering Ltd
- BBC Maida Vale
- MediaKind Systems UK Ltd - Phase 2
- Red Bee Media Phase 6
- March Collective Sale
- February Engineering Collective Sale
- MediaKind Systems UK Ltd
- Mi-Flues Ltd
- RW Parsons - Retirement Sale
- December Collective Sale
- Radius Aerospace UK Ltd
- November Engineering Collective Sale
- Lincoln Crankshaft & Machine Ltd
VIRTUAL / PHYSICAL VIEWING:
Please bring an acceptable form of photographic identification (UK Passport or UK Photographic Driving Licence), PPE including Safety Shoes will be required to gain access to the site. (No children under 16 years or animals will be allowed onto the sites)
Viewing: Tuesday 12th May 2026 - By prior appointment with the Auctioneers only
Lots located at: The Works, Unit 4-5, Saracen Business Park, Newark Road, Peterborough, PE1 5WS.
ON-LINE BIDDING:
1) Purchasers wishing to bid for any lot must first register on-line (www.ppauctions.com) and agree to abide by both the specific sale conditions (purchaser's terms) and the general terms & conditions.
2) All quantities, dimensions, descriptions & photographs given in the catalogue, placed on the bidding pages or quoted by the Auctioneer are approximate and for guidance only, and no warranties are given or implied.
3) Any bid (acceptable to the auctioneer) forms a legally binding contract and the purchaser is responsible for the lot or lots once confirmed by invoice from the Auctioneer. Lots marked '(Delayed Collection)' may be used by the vendor until the release date. N.B. Lots are not transferable.
4) VAT is payable at the current rate on all lots and on the Buyers Premium (Exported Items: Applicable VAT may be refunded on production of satisfactory shipping documents).
5) Buyers Premium of 18% plus VAT is payable on the bid price.
6) Timing: Lots will close at between 30 second & 2 minute intervals starting from 10.30am on Thursday 14th May 2026. Any bids received on a lot within the last two minutes will extend the closing time by two minutes for that lot.
OTHER BIDDING METHODS:
Purchaser's unable to bid on-line may bid by the following methods:-
A. Proxy Bids - all bids must be submitted to the Auctioneers on our bid form (available on request / viewing day).
B. Telephone Bids - available by prior arrangement with the Auctioneers only (minimum £2,000.00 GBP).
N.B. Bidding by any of the above methods forms a legally binding contract whether or not the lots have been viewed and regardless of any descriptive errors. Buyers Premium is still payable.
PAYMENT:
1) Payment must be made in full within 3 Days upon receipt of invoice. A 20% deposit is required on delayed items. Invoices will be emailed within 3 working days of the final lot closing.
Payment can be made by the following:-
a] BACS / CHAPS / bank transfer payment (preferred method)
b] On-Line UK debit & credit cards only: £500 Limit (+3% admin fee)
Title of the goods remains with the vendors until cleared funds have been received.
REMOVAL:
N.B. GOODS MAY ONLY BE COLLECTED AFTER CLEARED FUNDS HAVE BEEN RECEIVED AND ON PRODUCTION OF THE ORIGINAL COLLECTION NOTE.
Clearance: All 'Non Delayed' lots must be removed between TUESDAY 19th & FRIDAY 29th MAY 2026 (12.00noon). Due to the nature of the site, lots must be removed by prior appointment only (at least 48 hours notice - Tel: 01778 590111). Dates for clearance are Weekdays only (Excluding Bank Holidays). Times for clearance are 9.30am to 4.30pm Monday to Thursday and 9.30am to 12.00Noon Friday.
Please Note: Where relevant risk assessments, method statements, removal plans, timing details, etc. must be supplied to the Auctioneers for their approval prior to any work commencing on site. Where removal of equipment involves structural work "making good" will be the purchasers responsibility (BTMG). Please Note: Certain machines may have to be removed by approved contractors only.
Loading: All Lots are deemed to be purchased 'where they are situated' and in 'the condition as viewed'. All Preparation / Dismantling / Slinging / Lifting / Transportation etc. of the equipment is the exclusive responsibility of the purchaser.
Personnel / Equipment: All personnel intending to operate lifting / moving equipment on site must first produce to the Peaker Pattinson supervisor - current UK operating licenses - current UK equipment certificates and proof of all relevant UK insurances. They will be expected to work to The Vendors, Peaker Pattinson (Auctioneers) Ltd and current Health & safety regulations and may be ordered off the site at any time for breach of these regulations.
DJS Engineering Ltd
On-Line Auction Sale (Thursday 14th May 2026)
COMPLETED
Location
Peterborough, Cambridgeshire
Viewing Info
Virtual / Physical VIEWING: Tuesday 12th May 2026 - by appointment only
Bidding Info
Opens - Friday 1st May 2026
Closes - Thursday 14th May starting from 10.30am
Flysheet Availability
Catalogue Availability
Description
Retirement On-Line Auction Sale - over 350 lots including:
CNC TURNING / DRILL / VMC
Tong Tai Topper TN150TS CNC turning centre, Fanuc Series O-T control, 12 tool turret, tailstock, tool setting probe, 380mm chuck diameter, 80mm through spindle, swarf conveyor (1998)
Yang ML-25A CNC turning centre, Fanuc Series O-T control, tailstock, 12 tool turret, parts catcher, tool setting probe, collet chuck, swarf conveyor (1994), LNS quick load bar feed (1996)
Yang Eagle SL-20 CNC turning centre, Fanuc Series O-TD control, tailstock, collet chuck, 10 tool turret Hydrafeed multifeed ML1 short magazine bar feed (2000)
Yang Eagle SML-12 CNC turning centre, Fanuc Series O-TD control, 8 tool turret, swarf conveyor, Hydrafeed multifeed ML1 short magazine bar feed (1998)
Colchester CNC-2000 CNC lathe, GE Fanuc OT control, 8 tool turret, 7 1/2” CH x 48” b.c.
Olympic Seiki Model S-650 CNC drill / tap centre, twin pallet, Olympic Fanuc control, 12000rpm, swarf conveyor, 24 tool ATC, 630x350mm table, HSK63 taper (2004)
Bridgeport VMC1000.30 CNC VMC, Heidenhain control, Nikken 4th axis, 1150x490mm table, 30 tool ATC (1998)
MACHINE TOOLS / SMALL TOOLING / INSPECTION
Rexon DP-250A bench mounted pillar drill, 200x200mm RF table, 515-2580rpm
Steinle thread roller (centreless thread generator), 5" capacity with Qty tooling, thread rolls etc, s/n 2TR-502-2039
Jones & Shipman 1300 EIU universal grinder, 10x27" capacity, swivel internal spindle with equipment, s/n 1750/55
Jones & Shipman 1400 surface grinder, 24x8" mag chuck, coolant, s/n BO76130
Huron MU4 heavy duty toolroom milling machine, 58x18" table, 8-1200rpm, Heidenhain DRO / control (rebuilt R. Carne 1990)
Pedrazzoli Super Brown 300DV pull down cut off saw, 230mm wide vice
Ramo A42 centre lathe, GT DRO, 75mm spindle bore, 1900mm b.c. x 200mm CH, 31-1600rpm with tooling
DE grinder / linisher & vice on bench, 3x machine vices etc
Wolf DE linisher on base. NewArc RM330 Compact arc welder
Large Qty small tooling / inspection equipment inc: taps, reamers, drills, inserts, turning tools, thread chasers, collets, soft jaws, tool holders, machine vices, driven tooling, CI surface table, micrometers, gauges, vernier calipers etc etc
FACTORY PLANT / MISCELLANEOUS
Jungheinrich EFG-DF16 SP G&E 115-300 22 electric 3 wheel forklift truck, side shift, 1.5ton capacity, twin mast, 1900mm closed mast height, 3000mm lift height (2003) (new batteries & charger - May 2025)
Sealey 1000kg mobile lifting gantry, 2400mm width (2017) with Yale manual hoist
Qty tooling cabinets inc: Pinder Versatool cabinets etc, workbenches, cupboards, storage racks, pallet truck, office furniture, washing / dishwasher / fridge etc etc
Qty various bar stock racks with bar stock inc: stainless steel, steel, brass, plastics etc.
