- BBC Maida Vale
- MediaKind Systems UK Ltd - Phase 2
- Red Bee Media Phase 6
- March Collective Sale
- February Engineering Collective Sale
- MediaKind Systems UK Ltd
- Mi-Flues Ltd
- RW Parsons - Retirement Sale
- December Collective Sale
- Radius Aerospace UK Ltd
- November Engineering Collective Sale
- Lincoln Crankshaft & Machine Ltd
VIRTUAL / PHYSICAL VIEWING:
Please bring an acceptable form of photographic identification (UK Passport or UK Photographic Driving Licence), PPE including Safety Shoes will be required to gain access to the site. (No children under 16 years or animals will be allowed onto the sites)
Viewing: Tuesday 12th May 2026 - By prior appointment with the Auctioneers only
Lots located at: The Works, Unit 4-5, Saracen Business Park, Newark Road, Peterborough, PE1 5WS.
ON-LINE BIDDING:
1) Purchasers wishing to bid for any lot must first register on-line (www.ppauctions.com) and agree to abide by both the specific sale conditions (purchaser's terms) and the general terms & conditions.
2) All quantities, dimensions, descriptions & photographs given in the catalogue, placed on the bidding pages or quoted by the Auctioneer are approximate and for guidance only, and no warranties are given or implied.
3) Any bid (acceptable to the auctioneer) forms a legally binding contract and the purchaser is responsible for the lot or lots once confirmed by invoice from the Auctioneer. Lots marked '(Delayed Collection)' may be used by the vendor until the release date. N.B. Lots are not transferable.
4) VAT is payable at the current rate on all lots and on the Buyers Premium (Exported Items: Applicable VAT may be refunded on production of satisfactory shipping documents).
5) Buyers Premium of 18% plus VAT is payable on the bid price.
6) Timing: Lots will close at between 30 second & 2 minute intervals starting from 10.30am on Thursday 14th May 2026. Any bids received on a lot within the last two minutes will extend the closing time by two minutes for that lot.
OTHER BIDDING METHODS:
Purchaser's unable to bid on-line may bid by the following methods:-
A. Proxy Bids - all bids must be submitted to the Auctioneers on our bid form (available on request / viewing day).
B. Telephone Bids - available by prior arrangement with the Auctioneers only (minimum £2,000.00 GBP).
N.B. Bidding by any of the above methods forms a legally binding contract whether or not the lots have been viewed and regardless of any descriptive errors. Buyers Premium is still payable.
PAYMENT:
1) Payment must be made in full within 3 Days upon receipt of invoice. A 20% deposit is required on delayed items. Invoices will be emailed within 3 working days of the final lot closing.
Payment can be made by the following:-
a] BACS / CHAPS / bank transfer payment (preferred method)
b] On-Line UK debit & credit cards only: £500 Limit (+3% admin fee)
Title of the goods remains with the vendors until cleared funds have been received.
REMOVAL:
N.B. GOODS MAY ONLY BE COLLECTED AFTER CLEARED FUNDS HAVE BEEN RECEIVED AND ON PRODUCTION OF THE ORIGINAL COLLECTION NOTE.
Clearance: All 'Non Delayed' lots must be removed between TUESDAY 19th & FRIDAY 29th MAY 2026 (12.00noon). Due to the nature of the site, lots must be removed by prior appointment only (at least 48 hours notice - Tel: 01778 590111). Dates for clearance are Weekdays only (Excluding Bank Holidays). Times for clearance are 9.30am to 4.30pm Monday to Thursday and 9.30am to 12.00Noon Friday.
Please Note: Where relevant risk assessments, method statements, removal plans, timing details, etc. must be supplied to the Auctioneers for their approval prior to any work commencing on site. Where removal of equipment involves structural work "making good" will be the purchasers responsibility (BTMG). Please Note: Certain machines may have to be removed by approved contractors only.
Loading: All Lots are deemed to be purchased 'where they are situated' and in 'the condition as viewed'. All Preparation / Dismantling / Slinging / Lifting / Transportation etc. of the equipment is the exclusive responsibility of the purchaser.
Personnel / Equipment: All personnel intending to operate lifting / moving equipment on site must first produce to the Peaker Pattinson supervisor - current UK operating licenses - current UK equipment certificates and proof of all relevant UK insurances. They will be expected to work to The Vendors, Peaker Pattinson (Auctioneers) Ltd and current Health & safety regulations and may be ordered off the site at any time for breach of these regulations.
DJS Engineering Ltd
On-Line Auction Sale (Thursday 14th May 2026)
| Description | Bids | Price | Time Left | |
|---|---|---|---|---|
|
|
Lot 361 Qty various off cuts of bar stock on rack (as photo) |
0 | £10.00 |
1w 5d
Ends at 16:18
|
|
|
Lot 362 Rexon DP-250A bench mounted pillar drill, 200x200mm RF table, 515-2580rpm |
0 | £10.00 |
1w 5d
Ends at 16:19
|
|
|
Lot 363 Sealey 1000kg mobile lifting gantry, 2400mm width (2017) with Yale manual hoist |
0 | £10.00 |
1w 5d
Ends at 16:20
|
|
|
Lot 364 Qty various off cuts of bar stock (as photo) |
0 | £10.00 |
1w 5d
Ends at 16:21
|
|
|
Lot 365 Ramo A42 centre lathe, GT DRO, 75mm spindle bore, 1900mm b.c. x 200mm CH, 31-1600rpm with tooling |
0 | £10.00 |
1w 5d
Ends at 16:22
|
|
|
Lot 366 Yang Eagle SL-20 CNC turning centre, Fanuc Series O-TD control, tailstock, collet chuck, 10 tool tur... |
5 | £21.00 |
1w 5d
Ends at 16:23
|
|
|
Lot 367 Various steel stock on bar rack inc: box section, flat, angle, tube etc (as photo) |
0 | £10.00 |
1w 5d
Ends at 16:24
|
|
|
Lot 368 5x Lowbray Luminair factory lights |
0 | £10.00 |
1w 5d
Ends at 16:25
|
|
|
Lot 369 Sealey power mobile air compressor on receiver, 50ltr cap, 240v (2006) |
1 | £10.00 |
1w 5d
Ends at 16:26
|
|
|
Lot 370 Clarke Devil 4115 factory heater, 15kW |
0 | £10.00 |
1w 5d
Ends at 16:27
|
|
|
Lot 371 Munters Sial KID15ME fireball gas heater, 240v |
0 | £10.00 |
1w 5d
Ends at 16:28
|
|
|
Lot 372 Kobe KSH058 fireball gas factory heater, 240v |
0 | £10.00 |
1w 5d
Ends at 16:29
|
|
Lot 373 BLANK LOT |
0 | £10.00 |
1w 5d
Ends at 16:30
|
|
Lot 374 BLANK LOT |
0 | £10.00 |
1w 5d
Ends at 16:31
|
|
|
Lot 375 Scott Heating & Ventilation factory cooling fan, 240v |
0 | £10.00 |
1w 5d
Ends at 16:32
|
|
|
Lot 376 Metal workbench inc: bench vice, 1120x600mm |
1 | £10.00 |
1w 5d
Ends at 16:33
|
|
|
Lot 377 Rotary fixture |
0 | £10.00 |
1w 5d
Ends at 16:34
|
|
|
Lot 378 Qty various office furniture inc: 2x L-shape desks, 2x storage cupboards etc |
0 | £10.00 |
1w 5d
Ends at 16:35
|
|
|
Lot 379 Jungheinrich EFG-DF16 SP G&E 115-300 22 electric 3 wheel forklift truck, side shift, 1.5ton capacity... |
3 | £210.00 |
1w 5d
Ends at 16:36
|
|
|
Lot 380 Qty various Talbot Tool Grip jig bushes |
0 | £10.00 |
1w 5d
Ends at 16:37
|
|
|
Lot 381 3x drill chucks inc: JS-16, B16 & D.6 (boxed) |
0 | £10.00 |
1w 5d
Ends at 16:38
|
|
|
Lot 382 SPV SA.OE taper tapping head & collets in wooden box |
0 | £10.00 |
1w 5d
Ends at 16:39
|
|
|
Lot 383 Qty various HSS end mills to 12mm |
0 | £10.00 |
1w 5d
Ends at 16:40
|
|
|
Lot 384 Qty various HSS end mills to 2" |
0 | £10.00 |
1w 5d
Ends at 16:41
|
|
|
Lot 385 2x various taper quick release tool holders & sleeves |
0 | £10.00 |
1w 5d
Ends at 16:42
|
|
|
Lot 386 Qty various taper tool sleeves |
0 | £10.00 |
1w 5d
Ends at 16:42
|
|
|
Lot 387 CI tilting angle plate, 320x250x200mm |
0 | £10.00 |
1w 5d
Ends at 16:43
|
|
|
Lot 388 Qty various key steel to 300mm |
0 | £10.00 |
1w 5d
Ends at 16:43
|
|
|
Lot 389 Engineers 75mm machine vice |
0 | £10.00 |
1w 5d
Ends at 16:44
|
|
|
Lot 390 CI angle plate, 230x230mm |
0 | £10.00 |
1w 5d
Ends at 16:44
|
