- Biomet UK Ltd Phase 1
- Collins Aerospace
- September Collective Sale
- Biomet UK Healthcare Ltd
- 3M United Kingdom PLC
- Ninth Wave Audio PT
- Red Bee Media
- June Collective Sale
- Radius Aerospace UK Ltd - Final Clearance
- May Electronics / Broadcast Collective
- Polypipe (Plura Innovations Ltd) Auction
- May Engineering Collective
VIRTUAL / PHYSICAL VIEWING:
Please bring an acceptable form of photographic identification (UK Passport or UK Photographic Driving Licence), PPE including Safety Shoes will be required to gain access to the site. (No children under 16 years or animals will be allowed onto the sites)
Viewing: Tuesday 7th May 2024 - By appointment only (latest covid-19 guidelines to be observed)
Lots 1 - 69 located at: N&A Ltd, 1 Oakridge Road, High Wycombe, Buckinghamshire, HP11 2PF
Lots 70 - 199 located at: PP Saleroom, The Grange Offices, Aunby, Stamford, Lincolnshire, PE9 4EE.
Lots 200 - 201 located at: WL, 30 Brunel Way, Segensworth, Fareham, Hampshire, PO15 5SD.
ON-LINE BIDDING:
1) Purchasers wishing to bid for any lot must first register on-line (www.ppauctions.com) and agree to abide by both the specific sale conditions (purchaser's terms) and the general terms & conditions.
2) All quantities, dimensions, descriptions & photographs given in the catalogue, placed on the bidding pages or quoted by the Auctioneer are approximate and for guidance only, and no warranties are given or implied.
3) Any bid (acceptable to the auctioneer) forms a legally binding contract and the purchaser is responsible for the lot or lots once confirmed by invoice from the Auctioneer. Lots marked '(Delayed Collection)' may be used by the vendor until the release date. N.B. Lots are not transferable.
4) VAT is payable at the current rate on all lots and on the Buyers Premium (Exported Items: Applicable VAT may be refunded on production of satisfactory shipping documents).
5) Buyers Premium of 15.5% plus VAT is payable on the bid price.
6) Timing: Lots will close at 1 & 2 minute intervals starting from 10.00am on Friday 10th May 2024. Any bids received on a lot within the last two minutes will extend the closing time by two minutes for that lot.
OTHER BIDDING METHODS:
Purchaser's unable to bid on-line may bid by the following methods:-
A. Proxy Bids - all bids must be submitted to the Auctioneers on our bid form (available on request / viewing day).
B. Telephone Bids - available by prior arrangement with the Auctioneers only (minimum £2,000.00).
N.B. Bidding by any of the above methods forms a legally binding contract whether or not the lots have been viewed and regardless of any descriptive errors. Buyers Premium is still payable.
PAYMENT:
1) Payment must be made in full within 3 Days upon receipt of invoice. A 20% deposit is required on delayed items. Invoices will be emailed within 3 working days of the final lot closing.
Payment can be made by the following:-
a] BACS / CHAPS Payment (preferred method)
b] On-Line Personal UK debit cards Only: £500 Limit
Title of the goods remains with the vendors until cleared funds have been received.
REMOVAL:
N.B. GOODS MAY ONLY BE COLLECTED AFTER CLEARED FUNDS HAVE BEEN RECEIVED AND ON PRODUCTION OF THE ORIGINAL COLLECTION NOTE.
Clearance: All lots must be removed by Wednesday 22nd May 2024 (12.00noon). Due to the nature of the sites, lots must be removed by prior appointment only (at least 48 hours notice - Tel: 01778 590111). Dates for clearance are Weekdays only (Excluding Bank Holidays). Times for clearance are 9.30am to 4.30pm Monday to Thursday and 9.30am to 12.00Noon Friday.
Please Note: Where relevant risk assessments, method statements, removal plans, timing details, etc. must be supplied to the Auctioneers for their approval prior to any work commencing on site. Where removal of equipment involves structural work "making good" will be the purchasers responsibility (BTMG). Please Note: Certain machines may have to be removed by approved contractors only.
Loading: All Lots are deemed to be purchased 'where they are situated' and in 'the condition as viewed'. All Preparation / Dismantling / Slinging / Lifting / Transportation etc. of the equipment is the exclusive responsibility of the purchaser.
Personnel / Equipment: All personnel intending to operate lifting / moving equipment on site must first produce to the Peaker Pattinson supervisor - current UK operating licenses - current UK equipment certificates and proof of all relevant UK insurances. They will be expected to work to The Vendors, Peaker Pattinson (Auctioneers) Ltd and current Health & safety regulations and may be ordered off the site at any time for breach of these regulations.
May Engineering Collective
On-Line Auction Sale (Friday 10th May 2024)
COMPLETED
Location
PP Saleroom, Aunby, Lincolnshire & other UK Sites
Viewing Info
Virtual / Physical VIEWING: Tuesday 7th May 2024 - by appointment only
Bidding Info
Opens - Tuesday 30th April 2024
Closes - Friday 10th May starting from 10am
Flysheet Availability
Catalogue Availability
Description
CNC / MACHINE TOOLS / INSPECTION
Butler CNC bed type horizontal milling machine, Heidenhain control, 5000x1200mm bed, extension block, s/n DR12/25820
Harrison Alpha 400 CNC lathe, 15-2500rpm, 200mm CH x 1250mm b.c., 4 jaw chuck, face plate (1996) (cable split between controls)
Hurco BMC 30HT/M CNC milling machine, 1000x500mm bed, 24 tool ATC, Hurco Ultimax 3 control, 57490 hours, 8000rpm spindle (spares or repair - drive problem)
XYZ Edge 1500 CNC vertical turret mill, 1060x230mm table, 60-4200 rpm, Proto Trak Edge control, lock screw easy change tool holder (2000)
Kovosuit Mas VR2 radial drill, 90-4500rpm, 500x450mm box table
Syderic SVR15 single pillar bench drill, 110-6100rpm, 470x250mm table, coolant tank on metal stand
Buck & Hickman CT74G heavy duty DE grinder
RJH wet tool grinder / lapper, 240x140mm
Montanwerke Walter 30 tool cutter grinder, 900x190mm bed (1972)
March M1 tool & cutter grinder, 12x6" dia (1987) with A62 air bearing flute grinding attachment
Bridgeport turret mill, 42x9” table, powerfeed, 50-3750rpm, Anilam Wizard 211 DRO
Bridgeport turret mill, 42x9” table, 50-3750rpm, 175mm riser block, Anilam Wizard 150 Plus DRO & Tapmatic R7 tapping head
Bridgeport Series 1 2HP milling machine, 42x9" bed, powerfeed, Heidenhain DRO, 60-3000rpm, s/n 2909310780
Chester type 842VF vertical milling machine, powerfeed, 49x9” table, GT DRO, 50-3500rpm (2008)
TOS FV20 milling machine, 1400x300mm bed, 33-1000rpm, Newall Electronics DRO
Startrite 1018M horizontal bandsaw, 27x3365mm blade size (2007)
Macc New 315 EDV pull down chop saw, 260mm dia blade inc: vice clamp (2004)
Caltherm electric industrial oven, 20-100degC temperature range, 2800 x 1800 x 2100mm (L/W/H) external dimensions, 1300 x 900 x 1200mm (L/W/H) internal dimensions, accepts Euro pallet, 63A supply (2018)
Grade 2 granite surface table, 900x600mm on levelling base
Qty small tooling inc: HSS twist drills, side / face cutters, Gildermaster lathe tool holders, Crawford collets, Colchester tool holders, mag chucks, turning tools, Clarkson Radius fixture etc.
SHEETMETAL / WELDING
Pearson 8ft x 375ms capacity powered guillotine, blade gap adjustment, front supports, power back gauge
Safan type VS255-4 hydraulic guillotine, 2550x4mm capacity, auto back gauge, front supports
Edwards 6ft initial pinch manual rolls, 4” rolls
HMW 818 corner notcher, 200mm capacity, 800x800mm T slotted table, foot pedal
Kemppi Kempotig AC/DC 250 tig welder, 250A with C100P multi control, WU10 wire feed unit
British Federal WPI 25kva spot welder, 600mm throat, Monopak control / timer with Qty welding tips
Aga Mig 200B mig welder with CW6B wire feed unit
Murex Tradesmig 280-3 mig welder, 280A. Cemont Blumaster Mig350 mig welder, 350A
ESAB LAX 380 mig welder with ESAB MEK4 wire feed
2x Lincoln Electric Invertec V160T pulse tig welder on mobile trolley
Kemper 64121 fume extraction unit, 0.75kW, 1200m3/hr flow rate (2012)
FACTORY PLANT / MISCELLANEOUS
Granada Material Handling 5000kg SWL single girder beam, 12ft span approx. with SWF electric chain hoist & pendant control (2012)
Hako Hakomat B115R ride on electric floor cleaner, wet & dry, 24v DC, built in charger, 215hrs (2013)
3x metal multi compartment storage racks, 920x1820mm
Metal single door storage cupboard, 460x900x400mm
5x metal multi compartment storage racks, 920x1800mm
CompAir Cyclon 345 compressor, 53.3kW, 2970rpm (2000)
4x hydraulic pumps
15kW transformer on wheels
Mobile hydraulic power pack
Global 50kva transformer
Qty various garage equipment inc: Snap-On / Britool / Parkside / Makita / Bosch / Sealey etc toolboxes, hand tools, spanners, sockets, trolley jacks, power tools, car maintenance tools, portable welders etc
Necta Rondo digital vending machine, 240v
Necta Astro digital coffee / tea vending machine
Wright Attachments USCB 70x2000 fork truck prong attachment, 850kg SWL, 1000mm load cap (2014)
Qty various 3 & 4 step safety steps, etc.