Tel: +44 [0]1778 590111 Email:
Log In / Register Menu
Buyers Premium of 15.5% plus VAT is applicable on all bids. Please Note: Any bid forms a legally binding contract whether or not the lots have been viewed and regardless of any descriptive errors.     Any bid received on a lot within the last 2 minutes will extend the closing time by 2 minutes for that lot (Auction only).

Mazak Integrex i-300S 7 axis CNC turning centre, twin chucks / head, Mazatrol Smooth X control, 72 tool ATC, Cromar swarf management system, Absolent A.Mist 10 air filtration unit, 12,000rpm max spindle speed, s/n 267716 (2015) - Please Note: The Auctioneers reserve the right to sell this lot prior to the Tender sale date.

Chuck size main spindle 10 ". Chuck size secondary spindle 10 "
Maximum swing 658 mm. Swing over cross slide 658 mm
Swing during Y-Axis process 658 mm. Maximum machining diameter 658 mm
Bar work capability main spindle (dependant on chuck system) 77 mm
Bar capacity is dependant on the chucking system
Bar work capability secondary spindle 77 mm. Maximum machining length 1,519 mm
Maximum support weight main spindle chuck work 450 kg
Maximum support weight main spindle shaft work 1,000 kg
Maximum support weight secondary spindle chuck work 400 kg
RMP600 radio probe

Rotating speed maximum 4,000 min-¹. Rotating speed minimum 35 min-¹
Acceleration and deceleration time 3.8s. Through hole diameter 91 mm
Motor output (40% ED rating) 30.0 kW. Motor output (continuous rating) 22.0 kW
Maximum torque (40% ED rating) 724 Nm. Maximum torque (Continuous rating) 609 Nm

Rotating speed maximum 4,000 min-¹. Rotating speed minimum 35 min-¹
Motor output (40% ED rating) 26.0 kW. Motor output continuous rating 22.0 kW
Maximum torque (40% ED rating) 500 Nm. Maximum torque (Continuous rating) 341 Nm

Type Single spindle with ATC unit. Tool shank type HSK63 (72 pocket tool magazine)
Tool size (OD turning) 25 mm. Tool size (ID turning) 40 mm
Tool size (milling tool max diameter) 125 mm. Tool size (milling tool max length) 400 mm
90° indexing time 0.5 s

Rapid feed rate X 50 m/min. Rapid feed rate Z 50 m/min
Rapid feed rate Y 40 m/min. Rapid feed rate W 30 m/min
Movement stroke X 615 mm. Movement stroke Z 1,585 mm
Movement stroke Y 260 mm. Movement stroke W 1,574 mm

Coolant tank capacity 550 L. Power requirement (continuous) 81.95 kVA

Height of centers 1,235mm. Length 4,910mm. Width 2,800mm. Height 2,720mm. Weight 15,500kg.

No downloadable content available for this lot.

No links available for this lot.