Site access: Please bring an acceptable form of photographic identification (UK Passport or UK Driving Licence) as this is may be required to gain access to the site. (No children under 16 years or animals will be allowed on site
Viewing: Strictly by appointment with the Auctioneers only at: Various UK sites
1) A: Purchasers wishing to bid for any lot must first register on-line (www.ppauctions.com) and agree to abide by both the specific sale conditions (purchaser's notes) and the general terms & conditions.
or B: Purchasers wishing to bid for any lot must fill in the tender form provided (signing and supplying the relevant information on each page as well as completing the last page) Please Note: As this is an On-Line tender an email address MUST be provided in this information.
2) Any bid (acceptable to the auctioneer) forms a legally binding contract and all tender bids must be received by 12:00noon GMT - FRIDAY 20TH MARCH 2020. N.B. Lots are not transferable.
3) VAT is payable at the current rate on all lots and on the Buyer's & On-Line Premium.
4) Buyers Premium and On-Line Premium of 15.5% plus VAT is payable in addition to the tendered price.
5) Payment must be made in full within 5 Days upon receipt of invoice.
Payment can be made by the following:-
a] BACS / CHAPS Payment (preferred method)
b] On-Line Personal UK debit cards Only: £500 Limit
Title of the goods remains with the vendors until cleared funds have been received.
6) Please note that all bids must be submitted on-line through our website or in writing by post / fax on the tender form. No verbal bids will be considered.
7) All information supplied by the Auctioneer in promotional material, catalogues, etc. is provided in good faith but may not be correct. No liability is accepted by the Auctioneer or their Client's for incorrect information, and it is the responsibility of the purchaser to satisfy themselves by physical inspection with regard to: General description, measurement, location, age, general conditions, environmental or health and safety conditions, removal requirements, etc.
8) The final decision relating to confirmation of acceptance of offers is estimated to be taken within two weeks of the tender date.
Any bid is accepted on the above basis only and all terms are governed by English law.
The preferred / chosen bidder(s) will be required to agree to exact payment and removal schedules prior to acceptance of any bids / offers. Due to the nature of the sites, lots must be removed by prior appointment only (at least 48 hours notice - Tel: 01778 590111). Dates for clearance are Weekdays only. Times for clearance are 9.30am to 4.30pm Monday to Thursday & 9.30am to 12.00Noon Friday.
Where relevant risk assessments, method statements, removal plans, timing details, etc. must be supplied to the Auctioneers for their approval prior to any work commencing on site.Where removal of equipment involves structural work "making good" will be the purchasers responsibility (BTMG).Please Note: Certain machines may have to be removed by approved contractors only.
Loading: All Lots are deemed to be purchased 'where they are situated' and in 'the condition as viewed'. All Preparation / Dismantling / Slinging / Lifting / Transportation etc. of the equipment is the exclusive responsibility of the purchaser.
Personnel / Equipment: All personnel intending to operate lifting / moving equipment on site must first produce to the Peaker Pattinson supervisor - current operating licenses - current equipment certificates and proof of all relevant insurances. They will be expected to work to The Vendors, Peaker Pattinson (Auctioneers) Ltd and current Health & safety regulations and may be ordered off the site at any time for breach of these regulations.
Collection: GOODS MAY ONLY BE COLLECTED AFTER CLEARED FUNDS HAVE BEEN RECEIVED.
Peaker Pattinson (Auctioneers) Limited
TEL: +44(0)1778 590111 FAX: +44(0)1778 590730 EMAIL: firstname.lastname@example.org
Arqiva Limited Phase 2
On-Line Tender Sale (FRIDAY 20th MARCH 2020 [12.00noon])
Various UK Sites
By Appointment only with the Auctioneers Only.
TENDERS DUE: FRIDAY 20th MARCH 2020 (12.00noon)
TEMPORARY EQUIPMENT: This equipment was temporarily required to facilitate the UK 700MHz Clearance and is no longer required. All Equipment is 2 to 3 years old approx.
R&S 3kW TX (N9, N10, N11, N15, N30 & N31)
6x Rohde & Schwarz 3kW TX in single climate controlled secure container inc: 4x R&S THU-9 transmitters (in a 3+1 configuration – 1x exciter & 3x power amplifier modules), 3kW max power, DVB-T & T2 capable, single frequency network (using enabled GPS option in exciters), transmitter cooling & heat exchangers and A/B power distribution. Spinner rack feeder switch unit containing two RF switches per service; one for 3+1 transmitter changeover and one for main / reserve antenna selection with automatic antenna control system. 6.055m (L) x 2.438m (W) x 2.970m (H) approx dimensions.
NEC 600W TX (N2) (delivered 2017)
NEC 600W TX in single climate controlled secured container inc: 6x NEC DTU-52 1+1 transmitter systems with interconnecting feeders to a six channel RFS (CA6PPXX80E) combiner, patch panel & splitter system and LV electrical distribution equipment, 600W max power. Each 1+1 transmitter system consists of two NEC DTUL10/R6S transmitters (exciter, controller & power amplifier) with associated coaxial switch and test loads. Configurable to DVB-T, DVB-T2, MFN or SFN mode. 6.055m (L) x 2.890m (W) x 2.936m (H) approx dimensions.
LTV Flyaway TX (LTV5)
Tryo 200W DVB-T/DVB-T2 transmitter System inc: single equipment rack, 2200x800x600mm - comprises of 1+1 transmitter system (MC2-R-200/UHF/T2/PA2U ) with duplicated transmitters & changeover system. Configurable to DVB-T, DVB-T2, MFN or SFN mode. Maximum transmitter output 200W pre output filter. Each 1+1 transmitter system consists of a single exciter and a single 200W amplifier. A common control system, ASI distribution, Cisco Switch, output filter, dummy load, DB Broadcast, Merlin check receiver and duplicated mains distribution.
SPINNER 12kW Cu (C12.7)
Spinner 12kW combiner in single climate controlled secure container inc: Spinner single six channel combiner unit capable of combining 6x 12kW channels with interconnecting feeders & output splitter / patch panel. Each combiner system consists of 5x single ended constant impedance combining modules feeding a parallel pair of final constant impedance combining modules - also a pump rack and associated equipment for a liquid cooling system. Can be tuned to any set of Channels within the UHF television band. Rohde & Schwarz rack for Antenna Monitoring & Protection ("AM&P") equipment inc: power monitoring heads, data / measurement controllers & interlock marshalling modules, 6.055m (L) x 2.435m (W) x 2.6m (H) approx dimensions.
SPINNER 3.3kW Cu (C3.5, C3.6, C3.13, C3.14)
4x Spinner 3.3kW combiner in single climate controlled secure container inc: Spinner single six channel combiner unit capable of combining 6x 3.3kW channels with interconnecting feeders & output splitter / patch panel. Each combiner system consists of 6x single ended constant impedance combining modules feeding a splitter patch panel allowing either output or both outputs to be fed simultaneously. Can be tuned to any set of Channels within the UHF television band. Rohde & Schwarz rack for Antenna Monitoring & Protection ("AM&P") equipment inc: power monitoring heads, data / measurement controllers & interlock marshalling modules, 6.055m (L) x 2.435m (W) x 2.6m (H) approx dimensions.
SPINNER 12kW TL (TL12.7 & TL12.8)
2x Spinner 12kW test load in single climate controlled secure container inc: 2x Spinner independent water cooled wide band test loads with pumps, reservoirs & external heat exchangers in an integrated caged enclosure, rated at 36kW per test load, 6.055m (L) x 2.435m (W) x 2.6m (H) approx dimensions.
SPINNER 3.3kW TL (TL3.5 / TL3.6 & TL3.13 / TL3.14)
2x twin Spinner 3.3kW test load in single climate controlled secure container inc: 2x Spinner independent water cooled wide band test loads with pumps, reservoirs & external heat exchangers in an integrated caged enclosure, rated at 10kW per test load, 6.055m (L) x 2.435m (W) x 2.6m (H) approx dimensions.
ABILITY TO BID ON 17 EMPTY CONTAINERS - SEE TENDER DOCUMENT FOR FURTHER DETAILS
Climate controlled secure container with built in air conditioning, heating and lighting, 6.055m (L) x 2.435m (W) x 2.6m (H) approx dimensions