Site Access: Please bring an acceptable form of photographic identification (UK Passport or UK Photographic Driving Licence) PPE including Safety Shoes, Hi Viz & Safety Glasses as this will be required to gain access to the site. (No children under 16 years or animals will be allowed onto the site).
Viewing: Tuesday 19th November 2019 - By appointment only (other dates may be available by prior appointment only)
Lots located At: The Works, Club Street, Bamber Bridge, Preston, Lancashire, PR5 6FN, England
1) Purchasers wishing to bid for any lot must first register on-line (www.ppauctions.com) and agree to abide by both the specific sale conditions (purchaser's terms) and the general terms & conditions.
2) All quantities, dimensions, descriptions & photographs given in the catalogue, placed on the bidding pages or quoted by the Auctioneer are approximate and for guidance only, and no warranties are given or implied.
3) Any bid (acceptable to the auctioneer) forms a legally binding contract and the purchaser is responsible for the lot or lots once confirmed by invoice from the Auctioneer. Lots marked '(Delayed Collection)' may be used by the vendor until the release date. N.B. Lots are not transferable.
4) VAT is payable at the current rate on all lots and on the Buyers Premium (Exported Items: Applicable VAT may be refunded on production of satisfactory shipping documents).
5) Buyers Premium of 15.5% plus VAT is payable on the bid price.
6) Timing: Lots will close at between 1 & 5 minute intervals starting from 11.00am on Thursday 21st NOVEMBER 2019. Any bids received on a lot within the last two minutes will extend the closing time by two minutes for that lot.
OTHER BIDDING METHODS:
Purchaser's unable to bid on-line may bid by the following methods:-
A. Proxy Bids - all bids must be submitted to the Auctioneers on our bid form (available on request / viewing day).
B. Telephone Bids - available by prior arrangement with the Auctioneers only (minimum £2,000.00).
N.B. Bidding by any of the above methods forms a legally binding contract whether or not the lots have been viewed and regardless of any descriptive errors. Buyers Premium is still payable.
1) Payment must be made in full within 3 Days upon receipt of invoice. A 20% deposit is required on delayed items. Invoices will be emailed within 3 working days of the final lot closing.
Payment can be made by the following:-
a] BACS / CHAPS Payment (preferred method)
b] On-Line Personal UK debit cards Only: £500 Limit
c] Bankers Draft or Building Society cheque
d] Cheque (5 working days to clear)
Title of the goods remains with the vendors until cleared funds have been received.
N.B. GOODS MAY ONLY BE COLLECTED AFTER CLEARED FUNDS HAVE BEEN RECEIVED AND ON PRODUCTION OF THE ORIGINAL COLLECTION NOTE.
Clearance: All lots must be removed by Friday 6th December 2019 (12.00noon). Due to the nature of the site, lots must be removed by prior appointment only (at least 24 hours notice - Tel: 01778 590111). Dates for clearance are Weekdays only (Excluding Bank Holidays). Times for clearance are 9.30am to 4.30pm Monday to Thursday and 9.30am to 12.00Noon Friday.
Please Note: No shipping containers can be loaded on any site. Where relevant risk assessments, method statements, removal plans, timing details, etc. must be supplied to the Auctioneers for their approval prior to any work commencing on site. Where removal of equipment involves structural work "making good" will be the purchasers responsibility (BTMG). Please Note: Certain machines may have to be removed by approved contractors only.
Loading: All Lots are deemed to be purchased 'where they are situated' and in 'the condition as viewed'. All Preparation / Dismantling / Slinging / Lifting / Transportation etc. of the equipment is the exclusive responsibility of the purchaser.
Personnel / Equipment: All personnel intending to operate lifting / moving equipment on site must first produce to the Peaker Pattinson supervisor - current UK operating licenses - current UK equipment certificates and proof of all relevant UK insurances. They will be expected to work to The Vendors, Peaker Pattinson (Auctioneers) Ltd and current Health & safety regulations and may be ordered off the site at any time for breach of these regulations.
Baxi Heating UK Ltd - Auction Sale
On-Line Auction Sale (Thursday 21st November 2019)
Tuesday 19th November 2019 - By Appointment Only
(other dates / times may also be available by prior appointment with the Auctioneers only)
Bidding Opens - Wednesday 13th November 2019
Bidding Closes - Thursday 21st November 2019 starting from 11am
Foundry Main Equipment
ZPF Therm ST-G2 T4 melting & holding furnace, 2000kg /hr melting capacity, 4000kg volumetric capacity holding trough with CH 1000 balance & charging machine, E3.4 TEL 1210 rotary table with 2x 1.2T crucible furnaces, 3.4m diameter, General Kinematics 10 station turntable, cooling tunnel & manual pouring section, 800kg capacity crucible, James Eng 30m high approx 3 stack chimney with 500 / 550/ 650mm liners, 4 cooling fume dispersal, 42x7m approx. overall foot print (2004 & installed 2006 / 2007)
Nabertherm K240/12 furnace, 1200 degC, 80kW in excess of 50kg cap of pouring (2006)
ABB IRB6600M2000 7 axis robot with controller & pendant (2003)
Loramendi SLC3 60L CF core blowing machine, 80ltr blow capacity, 600ltr air tank capacity, 85kva, with ABB IRB6600F robot core handling system, Luber gassing unit, MDR-2 sand mixer, hydraulic tank & sand installation, FMS vent (2005)
Laempe LB25 automatic core shooter with Laempe 6_LB_C1 gas generator & Laempe LM3 core mixer (2000)
Hansberg H40 DO/ES/E/75 vertical core machine with controller, mixer unit, amine gassing unit, 780x570mm max (1997)
2x Richards horizontal core machines, 700x700mm max core size, Plasmagas 150 gassing unit, manual / automatic operation, 600mm wide conveyor with Stott screw conveyor
Straaltechnick UK Ltd front loading aluminium hook blast, 1400mm wide aperture, twin wheel, Siemens Simatic OP7 control, reclaim system & extraction, load / unload station
Schlick HB 12/16 twin wheel ‘Y’ track front loading shot blast, 1200x2000mm aperture with integral shot handling & cleaning, Demag front loading O/H gantry system (2003)
2x Massin Masdim 1H automatic core hammers, 11kW, Allen Bradley Panelview 300 control, conveyor (2006 & 2009)
Foundry Sundry Equipment
Sine Associates MTS 70/114m de gassing unit (2006)
Bianchi Tecno 2ST/B CNC twin station cutting machine, IEX computer control, 17kW, load / unload station (2007)
Bauer vertical band saw, heavy duty, 1350x1250mm table, 850mm throat (2001)
Single wheel space saver linisher, 100mm wide, 1500rpm, 7.5kW
Disa Serf automatic cut off machine, 55kW, 6 bar working force, manual / automatic operation (2004)
Foseco stainless steel storage vessel, forkable, with powered paddle, 850ltr capacity (2011)
2x Associated Plastics Limited scrubber units with Durafan 15kW & 30kW motors
5x 29 ton sand hoppers
Jobbing Foundry manual core machine, screw feed, hopper with resin station etc
Self-contained de-coring machine, twin hammer
5x 1000mm wide felting booth
Qty various Atlas Capco pneumatic tools, etc
ARL 3460 metal analyser with vacuum pump, Oxsas 1.7 optical emission analysis software, 15 elements
MK Industrievertretungen vacuum density tester
MK Industrievertretungen 3VT vacuum density tester
Nabertherm LE/2/11/RS bench type furnace, 1100degC max temp, 240v (2009)
Sartorius TE124S digital balance scales, 120g x 0.1mg capacity
Avery Berkal HL122 digital platform scales
Metaserv hand grinder. Metaserv 250mm dia sample polisher
Zeiss Axioskop stereo microscope with light source
Metaserv bench type moulding test unit
Factory Plant / Miscellaneous
Donaldson Torit DCE DF0-4-16-R 8 filter single bag extraction unit (2005)
2x Duscovent Engineering SFC extraction unit
Lloyds British 5000kg SWL ‘A’ frame, 6500mm approx. span, Stahl ST50 electric chain hoist, pendant control
Guyson Super 9 bead blast cabinet. 900mm dia table, single head with extraction unit
Cryonomic mobile dry ice machine, 110v
2x Nilfilsk VHC200 mobile industrial vacuums (2014)
Boiler wind flow test unit with fan unit, control panel, rotating hydraulic lift table, 3200x2000mm
5x Scaglia Liftronic Easy 125kg SWL floor mounted articulated lifters, 8ft span
3x Scaglia Liftronic Easy 60kg SWL floor mounted articulated lifter, 8ft span (to 2004)
2x Donati 125kg floor mounted articulated swing jibs, 10ft span, electric chain hoist, pendant control
2x Donati 250kg floor mounted articulated swing jibs, 10ft span, electric chain hoist, pendant control
Qty various 450mm & 600mm wide manual roller conveyors
Qty 1200mm wide manual rotating tables
2x Holmatro hydraulic cutters, etc etc.