PPauctions.com PPauctions.com
Go to Home Go to Home
AUCTION PAUSED

Please note this auction is currently paused. You will not be able to bid on any lots.

The auction was paused on - on resuming, all lot end times will extend accordingly.

Arqiva Limited (Phase 1)

Tender Sale

Location Various UK Sites
Viewing Info By appointment with the Auctioneers only
Bidding Info TENDERS DUE: FRIDAY 18th OCTOBER 2019 (12.00noon)
Flysheet Availability Download Flysheet
Catalogue Availability September 2019 - Request a catalogue
Description Phase 1 - Multiple Phase Disposal Program throughout 2019 and 2020
 
TEMPORARY EQUIPMENT: This equipment was temporarily required to facilitate the UK 700MHz Clearance and is no longer required.
 
TRANSMITTERS
R&S 3kW TX (N9)
Rohde & Schwarz 3kW TX in a single climate controlled secure container inc: 4x R&S THU-9 transmitters (in a 3+1 configuration – each transmitter consisting of 1x exciter & 3x power amplifier modules), 3kW max power, DVB-T & T2 capable, single frequency network (using enabled GPS option in exciters), transmitter cooling & heat exchangers and A/B power distribution. Spinner rack feeder switch unit containing two RF switches per service; one for 3+1 transmitter changeover and one for main / reserve antenna selection with automatic antenna control system. 6.055m (L) x 2.438m (W) x 2.970m (H) approx dimensions.
 
R&S 7kW TX (N20)
Rohde & Schwarz 7kW TX in a single climate controlled secure container inc: 4x R&S THU-9 transmitters (in a 3+1 configuration – each transmitter consisting of 1x exciter & 6x power amplifier modules), 7.7kW max power. DVB-T & T2 capable, single frequency network (using enabled GPS option in exciters), transmitter cooling & heat exchangers and A/B power distribution. Spinner rack feeder switch unit containing two RF switches per service; one for 3+1 transmitter changeover and one for main / reserve antenna selection with automatic antenna control system. 6.055m (L) x 2.438m (W) x 2.970m (H) approx dimensions.

NEC 12kW TX (N23 & N33)
2x NEC 12kW TX each in a dual climate controlled secure containers inc: 3x NEC DTU-52 transmitters (DDSA configuration - each transmitter consisting of 2x exciters & 10x power amplifier modules), 12.0kW max power, DVB-T & T2 capable, single frequency network (using enabled GPS option in exciters), transmitter cooling & heat exchangers and A/B power distribution. Spinner rack feeder switch unit containing three RF switches, one per service, for main / reserve antenna selection with an automatic antenna control system. Main’ Container: 6.055m (L) x 2.890m (W) x 2.936m (H) approx dimensions. Smaller container housing heat exchanger skid: 4.8m (L) x 2.4m (W) x 1.4m (H) approx dimensions.

NEC 600W TX (N4 & N5)
2x NEC 600W TX each in a single climate controlled secured container inc: 6x NEC DTU-52 1+1 transmitter systems with interconnecting feeders to a six channel RFS (CA6PPXX80E) combiner, patch panel & splitter system and LV electrical distribution equipment, 600W max power. Each 1+1 transmitter system consists of two NEC DTUL10/R6S transmitters (exciter, controller & power amplifier) with associated coaxial switch and test loads. Configurable to DVB-T, DVB-T2, MFN or SFN mode. 6.055m (L) x 2.890m (W) x 2.936m (H) approx dimensions
 
COMBINERS
SPINNER 7.7kW Cu (C7.3 & 7.4)

2x Spinner 7.7kW combiner each in a single climate controlled secure container inc: Spinner single six channel combiner unit capable of combining 6x 7.7kW channels with interconnecting feeders & output splitter / patch panel. Each combiner system consists of 6x single ended constant impedance combining modules feeding a splitter patch panel allowing either output or both outputs to be fed simultaneously. Can be tuned to any set of Channels within the UHF television band. Rohde & Schwarz rack for Antenna Monitoring & Protection ("AM&P") equipment inc: power monitoring heads, data / measurement controllers & interlock marshalling modules, 6.055m (L) x 2.435m (W) x 2.6m (H) approx dimensions.
 
SPINNER 3.3kW Cu (C3.3, C3.4, C3.7, C3.8, C3.10, C3.9, C3.15, C3.16)
8x Spinner 3.3kW combiner each in a single climate controlled secure container inc: Spinner single six channel combiner unit capable of combining 6x 3.3kW channels with interconnecting feeders & output splitter / patch panel. Each combiner system consists of 6x single ended constant impedance combining modules feeding a splitter patch panel allowing either output or both outputs to be fed simultaneously. Can be tuned to any set of Channels within the UHF television band. Rohde & Schwarz rack for Antenna Monitoring & Protection ("AM&P") equipment inc: power monitoring heads, data / measurement controllers & interlock marshalling modules, 6.055m (L) x 2.435m (W) x 2.6m (H) approx dimensions.

TEST LOADS
SPINNER 12kW TL (TL12.2)

Spinner 12kW test load in a single climate controlled secure container inc: 2x Spinner independent water cooled wide band test loads with pumps, reservoirs & external heat exchangers in an integrated caged enclosure, rated at 36kW per test load, 6.055m (L) x 2.435m (W) x 2.6m (H) approx dimensions.
 
SPINNER 7.7kW TL (TL7.3, TL7.4)
Spinner 7.7kW test load in a single climate controlled secure container inc: 4x Spinner independent water cooled wide band test loads with pumps, reservoirs & external heat exchangers in an integrated caged enclosure, rated at 23kW per test load, 6.055m (L) x 2.435m (W) x 2.6m (H) approx dimensions.

SPINNER 3.3kW TL (TL3.3, TL3.4, TL3.1, TL3.2, TL3.7, TL3.8, TL3.9, TL3.10, TL3.15, TL3.16)
5x twin Spinner 3.3kW test load each in a single climate controlled secure container inc: 4x Spinner independent water cooled wide band test loads with pumps, reservoirs & external heat exchangers in an integrated caged enclosure, rated at 10kW per test load, 6.055m (L) x 2.435m (W) x 2.6m (H) approx dimensions.

MISCELLANEOUS
PIE
8x Programme Input Equipment (PIE) in 19" rack capable of maintaining 3x multiplex services, (2 racks conjoined can provide six multiplex services) (P9, P10, P18, P20, P24, P3.2, P5.1, P7.2) - Each PIE rack contains: 2x dB Broadcast Cardinal iMDU’s, 2x dB Broadcast Hawkeye frames containing: 10x iQSA10 Distribution amplifiers, 2x iQSA182 ASI near seamless switches, 4x Hawkeye PSUs, 1x Advantech AMT75 Satellite receiver, 1x R&S DVMS4, 4x Evertz PSU’s, 2x Evertz 3405 Crates with 6 SFP’s installed, 1x Borri B400 UPS & 2x Cisco 24 port Ethernet switches (2017 to 2018)
2x Programme Input Equipment (SFN configuration) in 19" rack capable of maintaining 3x multiplex services with additional capability of timing & T2-MI signals and T2 switching for up to six multiplex services within one rack (SFN – 2, SFN – 4) - Each SFN rack contains: 2x dB Broadcast Cardinal iMDU’s, 2x dB Broadcast Hawkeye frames, containing: 10x iQSA10 Distribution amplifiers, 6x iQSA182 ASI near seamless switches, 4x Hawkeye PSUs, 2x Nevion or Enensys T2 MI gateway 1x Nevion T2 MI gateway switch or two Enensys T2 Gateway Switches (*), 1x Borri B400 UPS, 2x GPS receivers (2018)

CONTAINERS ONLY
4x climate controlled secure container with built in air conditioning, heating and lighting, 6.055m (L) x 2.435m (W) x 2.6m (H) approx dimensions (C12.1, C12.2, C3.1 & C3.2)
2x climate controlled secure container with built in air conditioning, heating and lighting, 6.055m (L) x 2.438m (W) x 2.970m (H) approx dimensions (N18 & N21)
 
REMOVED EQUIPMENT: This equipment is no longer required as a result of 700MHz Clearance

Emley Moor removed combiners inc: 2x Spinner 3 channel UHF DTV combining unit with 6x constant impedance modules (system is rated at 12kW - 14kW per input). 1x Spinner 6 channel UHF DTV combining units with 7x constant impedance modules (system is rated at 7kW - 8.5kW per input). 2x Spinner 2 channel UHF DTV combining units each comprising 2 constant impedance modules (system is rated at 4.5kW per input). Tunable over most UHF bands

Pontop Pike Removed Combiners inc: Spinner 3 channel UHF DTV combining unit with 6x liquid cooled constant impedance modules (system is rated at 7.5kW - 8.5kW per input). Spinner 3 channel UHF DTV combining unit with 3x liquid cooled constant impedance modules (system is rated at 4.7kW - 5.3kW per input). Spinner 6 channel UHF DTV combining unit with 10x constant impedance modules, 4 of which are liquid cooled (system is rated at 2kW - 8.5kW per input). Spinner 2 channel UHF DTV combining unit with 2x constant impedance modules (system is rated at 3kW per input). Tunable over most UHF bands

Selkirk Removed Combiner inc: 2x Radio Frequency Systems CZ-7AEx2 8 input channel combiners for UHF digital television. 50 to 65 (706MHz to 826MHz) channel frequency range, 1.7kW approx per channel input power (2006 upgraded 2012).

INDIVIDUAL COMPONENTS
Spinner UHF combiner (main unit) 1 5/8" input / output connector, channel 30 (2009)
Spinner UHF combiner (main unit) 1 5/8" input / output connector, channel 49/60 (2009)
2x Spinner UHF combiner (main unit), 7/8" input / output connector, channels 41/44/47 (2009)
2x Spinner UHF combiner (CU), 7/8" input / output connector, channels 41/44/47 (2009)
2x Spinner UHF combiner (CU), 1 5/8" input / output connector, channel 49 (2009)
2x Spinner UHF combiner (CU), 1 5/8" input / output connector, channel 60 (2009)
Spinner UHF filter, 7/8" input / output connector type, channel 48 (2016)
Spinner UHF patch panel, 1 5/8" input / output connector (2016)
Spinner UHF dummy load, 1 5/8" input / output connector, 5kW / 50ohm (2016)
Spinner UHF coupler, 1 5/8" input / output connector (2016)
Bird RF test load, 3 1/8" input connector, 10kW, 50ohm (2016)
Thermaline RF test load, 1 5/8" input connector, 5kW, 50ohm (2016)
3x Radio Frequency Systems cardioid antenna ‘strong backs’, 1x 4L, 1 x 8L & 1x 16L units
9x Sira UTV- 20 UHF Panel antennas, vertical polarization broadband, 470 - 860MHz, 10.5 dB gain directional pattern (suitable as a component)
7x R&S Transmitter System, 2x NEC Transmitter System, 24x CML Transmitter System.
39x Screen ARK-1 transposers, 7x Rohde & Schwarz SXL8000 transmitters, 5 Rohde & Schwarz XLX8000 transmitters, 16x DB Broadcast Merlin units. 2x NDS Modulators, 4x Thomson DVB-T Exciters, 2x Thomson DVB-T2 Exciters

MASTS - Available by Private Treaty Sale
JB Towers 40 meter tilt up lattice mast inc: mast steelwork, feeder management, stay wires and furniture, lightning protection bonds, aircraft warning light etc (Available July 2020)

Balfour Beatty galvanised structural steel 300 meter high lattice mast with 10 stay levels, inc: 62x 2m or 1.5m (W) x 6.0m (H) panels, 30x steel stays inc: terminations, stay tensioning facilities & linkages, feeder management system, rest platforms, access ladders, Latchways (fall arrest system), rigging jib for lifting & lowering objects, anti-climb system, stainless steel liquid damper, aircraft warning lights system & spherical bearing element to connect the mast base panel to the foundation – to be dismantled prior to collection. (Available Dec 2020)
Terms & Conditions View purchaser's terms | View terms & conditions

Refreshing listingsRefreshing listings...

Connectivity Problem

We have detected a problem with your internet connection - please ensure you are connected to the internet and then try again.

Data Error

There was a problem in obtaining the lot data - please check your internet connection is active and try again.

Bid Error

© Copyright Peaker Pattinson 2019. Company Registration No. 532 4695. | Terms and Conditions
Site by Devopa