12x various size flight storage cases inc: 2 of...
This item was sold in one of our on-line Auctions / Sales. We may have similar items available in our forthcoming Auctions, or if you have equipment to sell please contact us for free valuations, advice etc - Tel: 01778 590111 / Email: firstname.lastname@example.org or please get in touch with us via our contact page
12x various size flight storage cases inc:
2 off 1700x420x240mm approx, 1 off 1300x280x250mm approx
1 off 590x1200x800mm approx, 1 off 820x490x280mm approx
1 off 1230x430x230mm approx, 1 off 1200x590x510mm approx
1 off 1200x580x610mm approx, 1 off 1450x670x520mm approx
1 off 1730x740x660mm approx, 1 off 1200x600x900mm approx
1 off 1730x380x1020mm approx
- Lot located at: St Leonards-on-sea, East Sussex, TN38 9BA.
Auction - Penn Elcom Ltd
Equipment located at: Penn Elcom Ltd, Washington,Tyne & Wear.
Yangli JH25-250 mechanical double crank open back press, 2500kN nominal force,430-550mm die set height, MCGS touch screen control, 2700x920mm bed, 2100x700mm upper die, 275mm stroke, SDKFLI light guards, s/n 345176 (2015)
Hanoul HNCP-80 mechanical press, 80 ton capacity, 130mm stroke, 60-90SPM, 350mm die height, 1000x600mm bolster area, 840mm work height, s/n 992825 (1999) (FE36)
Hanoul HNCP-60 press, 60 ton capacity, 100mm stroke, 60-90SPM, 300mm die height adjustment, light guards, 840x500mm bolster area, 800mm working height, s/n 002261 (2002) (FE16)
Hanoul HNCP-60 press, 60 ton capacity, 100mm stroke, 60-90SPM, 300mm die height adjustment, light guards, 840x500mm bolster area, 800mm working height, s/n 001171 (2001) (FE14)
Hanoul HCP-60 press, 60 ton capacity, 125mm stroke, 60-90SPM, 300mm die height adjustment, light guards, 840x500mm bed, 800mm working height, s/n 992826 (1999) (FE11)
Worcester 30ton mechanical inclinable C frame press, 24x18” bed, mechanical guards, adjustable stroke
Cressex 30ton mechanical inclinable C frame press, 27x20” bed, mechanical guards
Durma (Axe & Status) AD-R25100 CNC downstroking pressbrake, 2550mm x 100ton capacity, 265mm stroke, Durma DU6000 control, Sick C4000 light guards, front support, segmented tooling, s/n 7312116375 (2011)
Durma (Axe & Status) AD-R2060 CNC downstroking pressbrake, 2050mm x 60ton capacity, Durma DU6000 control, Fiessler light guards, front support, segmented tooling, s/n 7301126665 (2012)
Machine Tools / Miscellaneous
Harrison M500 gap bed centre lathe, 250mm CH x 1500mm b.c., Sony LH51 DRO, 31-1600rpm, steady & 4 jaw chuck
Centre M3 turret mill, belt head, 1270x250mm table, powerfeed, 66-4540rpm, s/n 904170110 (2017)
Shuangyang 7125A surface grinder, 500x250mm mag chuck (2017)
Jones & Shipman 540 surface grinder, Eclipse 14x6” mag chuck, s/n BO75584
Interwood IMP hydraulic veneer / laminating press, 2550x1350mm bed, headted top & bottom platens, s/n 76 (1997)
Atlas 1300FDA Fuel Depot bunded diesel dispensing tank, Cube 56 dispenser, 1235ltr capacity.
Equipment located at: Penn Elcom Ltd, St Leonards-on-sea, East Sussex
Seyi SN2-110 double crank mechanical press, 110 ton, 110mm stroke, 45-90SPM, 350mm die height, 90mm slide adjustment, 1880x660mm bolster area (1998) (small crack in base of press - drilled)
Colly 2010 hydraulic Pressbrake, 200ton capacity, 3000mm long bed, 220kg/cm2 max operating pressure, 250mm stroke, Smartscan light guards, s/n 660
Ungerer 1500/2,50/17 roller leveller, 1500mm length, 2.5mm material thickness, 17 straightening rolls, 18.5kW
Richtmaschine leveller ungerer, 1500mm bale length, 3mm material thickness, 9 straightening rolls, 18kW (1980 – refurbished 2013)
Richtmaschine ungerer, 1520mm bale length, 3mm material thickness, 9 straightening rolls
Thermwood C40 CNC 3 axis router, 96x48" bed, single head, 8 turret, s/n C40187E0799 (dismantled)
2x Trumpf QuickGrind punch / tool grinders (1x unused).
Qty various size flight storage cases.